Re: [CAD_CAM_EDM_DRO] Re: My Next Router
Posted by
Larry Edinger
on 2002-09-30 18:08:03 UTC
I took an old air conpressor tank and a Gast Vacuum pump I got on Ebay and
made a Vacuum table & a vacuum bag set-up. Don't know way it woun't work for
a CNC.
made a Vacuum table & a vacuum bag set-up. Don't know way it woun't work for
a CNC.
----- Original Message -----
From: "echnidna" <echnidna@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, September 30, 2002 5:19 PM
Subject: [CAD_CAM_EDM_DRO] Re: My Next Router
> Hi Group,
> The vacuum pump link didnt work but this link will
>
> http://www.berkut13.com/sucker.htm
>
> seems a nice economical vaccum pump but 2 notes about it.
> most auto and refrigeration sealed units have some oil in the refrigerant
which is not possible as a vaccuum pump , but it is so cheap they could be
throwawy units.
>
> vacuum clamping with timber usually uses high volume pumps to offset the
many air leaks that can happen. but if sealed with tape or blanking pieces
etc the pump should work well. this pump would be great for vacuum clamp
pressing of laminates.
>
> I like the idea so much i will try it on my cnc router when it gets to
that stage
>
> Regards
> Bob thomas
>
> --- In CAD_CAM_EDM_DRO@y..., "deschrg2001" <deschrg2001@y...> wrote:
> > --- In CAD_CAM_EDM_DRO@y..., "jfglass2001" <jfglass2001@y...> wrote:
> > > Hi All,
> > >
> > > Well, I finished my router a few weeks ago, and I've noticed
> > certain
> > > things that I would like to change on it:
> > >
> > > 1) What does anyone know about making vacuum tables? My table is
> > 24"
> > > X 24". I machine completely wood, medium to heavy cuts, etc. etc.
> > >
> > > 2) Can anyone tell me anything about a medium to high speed
> > spindle
> > > that is quiet, that I can make/buy? I have a Porter Cable Router,
> > and
> > > that thing is wicked loud. I live in a small neighborhood, and I
> > > really don't want to piss off my neighbors. What about variable
> > > speed?
> > >
> > > Thanx for the help,
> > > Seth
> >
> > Put a gasket around the perimeter of your table, the self stick ones
> > for sealing doors should work OK. Drill a small hole in the center
> > and attach a vacumm pump to it. Here is a link to a site that
> > details how to build a cheap vacuum pump, for about $20.
> >
> > http://composite.about.com/gi/dynamic/offsite.htm?site=http%3A%2F%
> > 2Fwww.berkut13.com%2Fsucker.htm
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
Discussion Thread
jfglass2001
2002-09-29 18:07:09 UTC
My Next Router
Marv Frankel
2002-09-29 20:15:28 UTC
Re: [CAD_CAM_EDM_DRO] My Next Router
Tim Goldstein
2002-09-29 20:38:31 UTC
RE: [CAD_CAM_EDM_DRO] My Next Router
echnidna
2002-09-30 02:17:35 UTC
Re: My Next Router
ballendo
2002-09-30 04:17:09 UTC
Re: My Next Router
bjammin@i...
2002-09-30 04:57:17 UTC
Re: [CAD_CAM_EDM_DRO] Re: My Next Router
Les Watts
2002-09-30 07:46:07 UTC
Re: [CAD_CAM_EDM_DRO] My Next Router
deschrg2001
2002-09-30 08:24:10 UTC
Re: My Next Router
Brian
2002-09-30 15:30:30 UTC
Re: [CAD_CAM_EDM_DRO] My Next Router
echnidna
2002-09-30 17:19:44 UTC
Re: My Next Router
Larry Edinger
2002-09-30 18:08:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: My Next Router