Re: [CAD_CAM_EDM_DRO] Maxnc

Also if you are looking for a "GOOD" reasonably priced CAD CAM package I
would recommend Dolphin CAD CAM - Takes a bit of time to master but in "my
opinion" is the best "value" package on the market.

Before I retired from the rat race in 1998, I used a number of cad/cam
packages from $5000+ for milling and turning, in a commercial environment,
many used 3D inputs but I found in the end I reverted to Dolphin to program
parts. The main reason was I could understand the dolphin software.

I believe DOLPHIN is available through this group at a discounted price,
and I cannot recommend it too highly.

----- Original Message -----
From: "semenoff" <semenoff@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, October 11, 2002 9:55 PM
Subject: [CAD_CAM_EDM_DRO] Maxnc


> Is anyone out there using Maxpro (Maxnc DOS based
> step/dir controller) ? I'm suspicious
> of any controller software with "pro" in the name,
> so I thought I'd ask this time before dropping
> another $150.
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>