Re: [CAD_CAM_EDM_DRO] Maxnc

Hi,

I've don't know MAXPRO, but I have been using MAXDLX for about 1 year now
and have found it meets all my requirements for clockmaking and model loco
building.

I am running a homemade mill from a design in the UK (compumill) and a
sherline mill with 4th axis (rotary table) both machines run on Camtronics
2A controller boards.
hope this is helpfull.

I also use turbonc but the big drawback for ME is no cutter comp i.e G41
and G42

----- Original Message -----
From: "semenoff" <semenoff@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, October 11, 2002 9:55 PM
Subject: [CAD_CAM_EDM_DRO] Maxnc


> Is anyone out there using Maxpro (Maxnc DOS based
> step/dir controller) ? I'm suspicious
> of any controller software with "pro" in the name,
> so I thought I'd ask this time before dropping
> another $150.
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>