Clifton Precision Servo Specs
Posted by
whippo6
on 2002-10-14 09:58:46 UTC
Hi,
I have a couple of DC permanent magnet brush servo motors I'm trying
to find the specifications for. They measure 2.25 inch diameter
by 4 inch long plus a 1 inch long encoder.
Clifton Precision (Litton)
Model No. DH-2250-AU-1
P/N 96214-994206-0001, Rev G.
Date Code 8244
I've looked at the specs on the Poly-Scientific site
at <http://www.polysci.com/datasheetlist.htm>
selecting: Permanent Magnet DC Motors
to download <http://www.polysci.com/Documents/moc23series.pdf>
or from <http://www.polysci.com/Motors/c23series.html>.
but these motors are not listed. They must have been made before
Northrop Grumman Poly-Scientific acquired Clifton Precision.
The encoder has a circuit board labeled "Texas Instruments" and has
a LM339N chip on it. Any idea if it is TTL compatible?
Any help would be appreciated.
Thanks,
Wayne Whippo (Boulder, CO)
I have a couple of DC permanent magnet brush servo motors I'm trying
to find the specifications for. They measure 2.25 inch diameter
by 4 inch long plus a 1 inch long encoder.
Clifton Precision (Litton)
Model No. DH-2250-AU-1
P/N 96214-994206-0001, Rev G.
Date Code 8244
I've looked at the specs on the Poly-Scientific site
at <http://www.polysci.com/datasheetlist.htm>
selecting: Permanent Magnet DC Motors
to download <http://www.polysci.com/Documents/moc23series.pdf>
or from <http://www.polysci.com/Motors/c23series.html>.
but these motors are not listed. They must have been made before
Northrop Grumman Poly-Scientific acquired Clifton Precision.
The encoder has a circuit board labeled "Texas Instruments" and has
a LM339N chip on it. Any idea if it is TTL compatible?
Any help would be appreciated.
Thanks,
Wayne Whippo (Boulder, CO)
Discussion Thread
whippo6
2002-10-14 09:58:46 UTC
Clifton Precision Servo Specs
w.higdon@a...
2002-10-14 10:25:31 UTC
Re: [CAD_CAM_EDM_DRO] Clifton Precision Servo Specs
Steven Ciciora
2002-10-14 10:30:16 UTC
Re: [CAD_CAM_EDM_DRO] Clifton Precision Servo Specs
JanRwl@A...
2002-10-14 11:19:44 UTC
Re: [CAD_CAM_EDM_DRO] Clifton Precision Servo Specs
whippo6
2002-10-15 21:52:08 UTC
Re: Clifton Precision Servo Specs
Steven Ciciora
2002-10-16 08:24:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: Clifton Precision Servo Specs