Re: [CAD_CAM_EDM_DRO] power supply connection issues

Neutral and Line..I leave it up to you which is N and which is L.
Garry

To: CAD_CAM_EDM_DRO@yahoogroups.com
From: "jagco1998" <jagco1998@...>
Date sent: Thu, 17 Oct 2002 00:13:41 -0000
Subject: [CAD_CAM_EDM_DRO] power supply connection issues
Send reply to: CAD_CAM_EDM_DRO@yahoogroups.com

> I bought a used power supply that has no cord attached.
> I went to the manufacturers website and the only info they had on it
> was the same markings that are on the board of the power supply. I was
> hoping that one (or more) of you intelligent people could help me with
> this. The marking for the input AC are N,L,G. All of which are
> together in one terminal block. I assume that the "G" is ground,(could
> be wrong), but what are the other two?
>
> Regards,
> Jim
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
> it if you have trouble. http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
> sister site to the CCED group, as many of the same members are there,
> for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
> THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill, List Mom List Owner
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>