CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Drill press & cross-slide vice

Posted by Dan Mauch
on 2002-10-30 08:19:08 UTC
Been there and done that. I used the 5" version from harbor freight for
around 60.00 I had to take a lot of slop out of the drive mechanism and
made some stepper motor mounts. I install Torrington needle thurst
bearings on each axis. I used it to cnc drill some stepper motor mounts.
The problem is that you cannot use a drill press as a mill because of
the slop in the spindle assembly. The enco mill drill tables for $119 is
a better deal in the long run but figure out how you plan to do the
spindle first.
Dan
-----Original Message-----
From: vandersandtc [mailto:vandersandtc@...]
Sent: Wednesday, October 30, 2002 12:52 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Drill press & cross-slide vice


Now my question : I bought a cross-slide vice yesterday and my first
thought was 'Hey, if I stick some steppers on this sucker, mount it
on my drill press then I might have a cheap mill' - I suppose a lot
of people have asked this question before. I would like to hear your
comments please.

Regards
Coert



Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner



Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/

Discussion Thread

vandersandtc 2002-10-30 07:15:20 UTC Drill press & cross-slide vice Dan Mauch 2002-10-30 08:19:08 UTC RE: [CAD_CAM_EDM_DRO] Drill press & cross-slide vice Van Der Sandt Coert 2002-10-31 00:07:27 UTC RE: [CAD_CAM_EDM_DRO] Drill press & cross-slide vice Dan Mauch 2002-10-31 07:11:39 UTC RE: [CAD_CAM_EDM_DRO] Drill press & cross-slide vice Dave Dillabough 2002-10-31 11:22:06 UTC RE: [CAD_CAM_EDM_DRO] Drill press & cross-slide vice turbulatordude 2002-10-31 18:05:28 UTC Re: Drill press & cross-slide vice JJ 2002-11-01 18:15:44 UTC RE: [CAD_CAM_EDM_DRO] Re: Drill press & cross-slide vice turbulatordude 2002-11-02 06:48:56 UTC Re: Drill press & cross-slide vice