Re: [CAD_CAM_EDM_DRO] Pre-wired drive unit

Ah-ha and a couple of others have plug and play units.

Building your own is not that hard. I could break out my cnc router plans
and give you all the information that you would need to build your own.

If the need is there, I could have a local company build several units.

Bob Campbell
www.campbelldesigns.com

----- Original Message -----
From: "b564htf" <toolingrus@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, November 01, 2002 6:23 PM
Subject: [CAD_CAM_EDM_DRO] Pre-wired drive unit


> Does anyone manufacture a pre-wired drive unit with geckodrives,
> power supply, parallel plug etc ? I'd like to be able to just
> plug
> in the parallel cable and hook up the motors without a lot of
> building.
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>