CAD CAM EDM DRO - Yahoo Group Archive

Re: Pre-wired drive unit

Posted by deanc500
on 2002-11-02 13:10:07 UTC
Hi, I build custom drive units in both servo and stepper models.
Voltages from 24 to 80 and currents up to 40A. I can supply a system
with or without motors. Motors can be new or surplus. Here are pics of
a AS300D desktop servo controller and a AS300M machine mounted
controller.

www.members.shaw.ca/axxus3/as300d1.jpg
www.members.shaw.ca/axxus3/as300dtop.jpg
www.members.shaw.ca/axxus3/as300dopen.jpg
www.members.shaw.ca/axxus3/as300dback.jpg
www.members.shaw.ca/axxus3/as300m.jpg

All controllers feature self latching e-stop relay, five switch inputs
to computer, and two 12V relay drive outputs.

Contact me off list for details

Dean

axxus@...



--- In CAD_CAM_EDM_DRO@y..., "b564htf" <toolingrus@h...> wrote:
> Does anyone manufacture a pre-wired drive unit with geckodrives,
> power supply, parallel plug etc ? I'd like to be able to just
> plug
> in the parallel cable and hook up the motors without a lot of
> building.

Discussion Thread

b564htf 2002-11-01 18:23:30 UTC Pre-wired drive unit Robert Campbell 2002-11-01 19:06:19 UTC Re: [CAD_CAM_EDM_DRO] Pre-wired drive unit deanc500 2002-11-02 13:10:07 UTC Re: Pre-wired drive unit Matt Shaver 2002-11-02 20:38:38 UTC Re: [CAD_CAM_EDM_DRO] Re: Pre-wired drive unit Alan Rothenbush 2002-11-03 14:18:10 UTC Re: Pre-wired drive unit