RE: [CAD_CAM_EDM_DRO] Re: Flashcut

Depends what you mean by "like Flashcut". If you mean a windows based
controller than look at Mach1 or DeskWinNC. If you mean a turn key
system than we need to know what type/size machine to give you some
ideas. If it is for a Sherline sized machine than take a look at the
package that Dan at Camtronics is offering. $500 for a turn key 2.5 amp
3 axis controller. Add $300 for 3 motors and $100 for a Mach1/Master5
license and you have a complete system for $900 that will run with the
best of them.

Tim
[Denver, CO]

> -----Original Message-----
> >
> > I think you have it figured out... It's expensive, it must be good!
> >
> > Matt
>
> Matt & others;
> can you provide me with some examples of inexpensive systems
> like Flashcut [since I've been considering purchasing on of
> their retro fit systems.] thanks Owen
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com
> to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill
List Mom List Owner