Re: Flashcut

Hey Tim. I am going to be retro'n my bench top unit. As you can tell by my
misinformed posts, I'm still learning my way around. I have no preference
for windows based or DOS, I've used both over the years and wouldn't know
which is best [if there is even a difference.]
Though I have a ton of questions I've been unable to locate answers for with
my web searches.
thanks for your help I'll check out the two you recomend.
Owen

----- Original Message -----
> Depends what you mean by "like Flashcut". If you mean a windows based
> controller than look at Mach1 or DeskWinNC. If you mean a turn key
> system than we need to know what type/size machine to give you some
> ideas. If it is for a Sherline sized machine than take a look at the
> package that Dan at Camtronics is offering. $500 for a turn key 2.5 amp
> 3 axis controller. Add $300 for 3 motors and $100 for a Mach1/Master5
> license and you have a complete system for $900 that will run with the
> best of them.
>
> Tim
> [Denver, CO]