CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Re: Reviving my mill (EMC)

Posted by Dave Lantz
on 2002-11-07 09:17:56 UTC
one thing i was working on for a while was FVWM, a windowing system that
takes up around 5 meg of ram, and little disk space (not sure) it loads off
a text file for parameters, and can be set up without task bars or anything
really. One thing i was working on was loading a blank desktop with only
the tkemc window without a bar around it (so you couldnt move it, resize
it..etc...) i got most of it working... ---dave l

-----Original Message-----
From: William Scalione [mailto:wscalione@...]
Sent: Thursday, November 07, 2002 10:53 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Re: Reviving my mill (EMC)


Hi Ray,

I once did a linux install on my laptop and somehow cobbed it up, so when I
did a startx I got
X to start with no window manager, just X and a terminal window came up.
Typing startkde in the terminal window would then start kde. Anyway, what
I'm getting at is (I never tried this) could I have started TkEMC from the
terminal and run it without a window manager? That would save quite a bit of
space if you cant fit a wm



Bill

PS I have been real busy lately (new baby and lots of work) and have had no
time for further development of the touch screen GUI, Hope to get back to it
soon. I do use it on my machine though, when I find the time to run it.

>
> I'm with you in wanting a "wristwatch" version. The kernel, even with
> the real time extensions runs to less than a meg. If we left off the
> x-windows and windows managers, expanded the EMC's text mode interfaces
> with key bindings, and used multitasking terminals for viewing and
> working with the parts of a running system we should be able to build a
> compressed, run time binary that would fit on that 4 meg flash. I once
> made a compressed single personality version of the EMC code that fit on
> and ran from a floppy.
>
> I worked a bit with a SBC supplier who thought that we should be able to
> push it all into a 32 Meg flash and that included x-windows a window
> manager, tickle, and the EMC.



Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Discussion Thread

John Murphy 2002-11-06 18:04:04 UTC Reviving my mill (EMC) William Scalione 2002-11-06 18:30:18 UTC Re: [CAD_CAM_EDM_DRO] Reviving my mill (EMC) Ray Henry 2002-11-07 06:54:25 UTC Re: Reviving my mill (EMC) William Scalione 2002-11-07 07:53:02 UTC Re: [CAD_CAM_EDM_DRO] Re: Reviving my mill (EMC) Dave Lantz 2002-11-07 09:17:56 UTC RE: [CAD_CAM_EDM_DRO] Re: Reviving my mill (EMC) bschwand 2002-11-07 12:01:12 UTC Re: Reviving my mill (EMC)