CAD CAM EDM DRO - Yahoo Group Archive

Re: gecko questions

Posted by mariss92705
on 2002-11-07 14:34:08 UTC
Mark,

Well, I'm a "nerdie" kind of guy. Connected in series, your 4.5A 2V
motor is now a 2.25A, 4V motor. You can go as high as 20 times the
motor's voltage of 4V, or 80VDC.

Increasing the voltage increases the speed to which the motor
maintains its low speed torque. It doesn't change the low speed
torque at all. If it goes fast enough now for what you need then
nothing is gained by increasing the voltage.

Mariss

--- In CAD_CAM_EDM_DRO@y..., "markpowerplus" <mabw@b...> wrote:
> Hi!,
> Thanks Mariss for your prompt reply , i needed some one to reassure
> me!
> Also what would be the maxium voltage I could run these motor
series
> connected? and what is the gain by increasing voltage ? more speed
or
> more torque ? sorry about the "nerdie" qustions ,by the way i love
my
> Geckos! just fantatic !!!!
> cheers
> Mark

Discussion Thread

markpowerplus 2002-11-07 10:49:55 UTC gecko questions mariss92705 2002-11-07 11:41:19 UTC Re: gecko questions markpowerplus 2002-11-07 11:57:56 UTC Re: gecko questions Tim Goldstein 2002-11-07 12:47:59 UTC Re: [CAD_CAM_EDM_DRO] gecko questions mariss92705 2002-11-07 14:34:08 UTC Re: gecko questions markpowerplus 2002-11-07 16:26:32 UTC Re: gecko questions