Re: VFD's
Posted by
doug98105
on 2002-11-08 06:12:40 UTC
Dave,
You say a 1hp VFD will run a 25hp motor up the max amps of the
drive. That's kind of extreme, but I get your point.
This is a question I've never been able to get a straight answer to.
I was concerned about running a 5hp motor off a 3hp drive. None of
the engineeers at the various motor or drive manufacturers could give
a definitive answer or were willing to venture a guess as to whether
there was any downside to doing this, other than reduced hp from the
5hp motor.
Doug
You say a 1hp VFD will run a 25hp motor up the max amps of the
drive. That's kind of extreme, but I get your point.
This is a question I've never been able to get a straight answer to.
I was concerned about running a 5hp motor off a 3hp drive. None of
the engineeers at the various motor or drive manufacturers could give
a definitive answer or were willing to venture a guess as to whether
there was any downside to doing this, other than reduced hp from the
5hp motor.
Doug
--- In CAD_CAM_EDM_DRO@y..., "turbulatordude" <davemucha@j...> wrote:
(snip)
> Your 25 hp VSD will run your 1 hp motor and your 1 hp VSD will run
> your 25 hp motor. No really, but only up to the max amps of the
> drive.
>
> Dave
Discussion Thread
johnhe
2001-10-04 10:44:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: VFD's
valrox1
2002-01-30 12:08:30 UTC
VFD's
Tim Goldstein
2002-11-07 16:37:30 UTC
Re: [CAD_CAM_EDM_DRO] VFD's
Mike Gann
2002-11-07 19:10:59 UTC
Re: [CAD_CAM_EDM_DRO] VFD's
Jon Elson
2002-11-07 23:02:09 UTC
Re: [CAD_CAM_EDM_DRO] VFD's
turbulatordude
2002-11-08 04:36:03 UTC
Re: VFD's
doug98105
2002-11-08 06:12:40 UTC
Re: VFD's
jmkasunich
2002-11-08 06:40:09 UTC
Re: VFD's
bjammin@i...
2002-11-08 09:34:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: VFD's
Mike Gann
2002-11-08 19:14:09 UTC
Re: [CAD_CAM_EDM_DRO] VFD's
Jon Elson
2002-11-08 22:33:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: VFD's
Jon Elson
2002-11-08 22:39:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: VFD's
Jon Elson
2002-11-08 23:18:23 UTC
Re: [CAD_CAM_EDM_DRO] VFD's
turbulatordude
2002-11-10 14:15:48 UTC
Re: VFD's
Jon Elson
2002-11-10 22:26:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: VFD's
turbulatordude
2002-11-11 04:36:13 UTC
Re: VFD's
jmkasunich
2002-11-11 08:05:27 UTC
Re: VFD's
Jon Elson
2002-11-11 11:23:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: VFD's
jmkasunich
2002-11-11 13:21:15 UTC
Re: VFD's