Re: [CAD_CAM_EDM_DRO] stepper - servo Holding tourque

Jon
Thanks for the help / info
: -)
Owen

Subject: Re: [CAD_CAM_EDM_DRO] stepper - servo Holding tourque

> >
> Well, let's see what we can figure out about this system. 750 Oz-In =
> 46.875 Lb-In. With the .200"
> pitch screw, that will deliver 1473 Lbs of linear force. If these
> motors drop to 100 Oz-In torque at
> some speed, that will deliver 196 Lbs linear force.
>
> The formula is (Oz-In / 16) / (.200/(2 Pi)) = linear force in Lbs.
>
> Jon