CAD CAM EDM DRO - Yahoo Group Archive

Re: geckos lifetime...

on 2002-12-09 00:06:28 UTC
>
> Further, if a circuit, even a beautifully-engineered and assembled
thing like
> the G2xx circuits, is "rated" to handle "up to 7 amps" and "up to
80 volts",
> it will FUNCTION just fine with those voltages and currents raging
through
> them, when installed, and probably will for many hours of practical
use.
> But, were I asked to bet on the first to fail, that one, or one
driving a
> stepper drawing only 2 amps per winding, and using a 30 VDC supply,
I'd bet
> it'd be the one on 80 volts! Note, however! This is a totally
UNscientific
> guess! I have actually NO empirical data to support this
assumption!
>


thanks for the input...
hmm,....thats what makes me most nervous, maybe running them at 6amps
is the pain-limit? i currently use jvl drivers 100% flawless hour
after hour, year after year, rated to 6 amps, and i squeeze out all
of those amps, and they dont get hotter than a fart, but they cost 3
times more than the 201´s....
the only reason why i was thinking of a swap to the geckos is that i
thought i could save a some $. however, i dont want to spend my time
travelin around and replace popped g201´s...
does anyone know any commercial, heavy duty, serious machine brand
out there with geckos that runs ok? (at 6 or even 7 amps)



js

Discussion Thread

Jens Swales <jipeess2000@y... 2002-12-08 15:10:00 UTC lifetime... Robert Campbell 2002-12-08 15:22:31 UTC Re: [CAD_CAM_EDM_DRO] lifetime... dvideohd <jrobinson46@c... 2002-12-08 17:43:44 UTC Re: lifetime... JanRwl@A... 2002-12-08 18:34:27 UTC Re: [CAD_CAM_EDM_DRO] lifetime... Jens Swales <jipeess2000@y... 2002-12-09 00:06:28 UTC Re: geckos lifetime... caudlet <tom@t... 2002-12-09 07:11:17 UTC Re: geckos lifetime... JanRwl@A... 2002-12-09 13:46:43 UTC Re: [CAD_CAM_EDM_DRO] Re: geckos lifetime... Jens Swales <jipeess2000@y... 2002-12-09 13:58:03 UTC Re: geckos lifetime... JanRwl@A... 2002-12-09 14:59:59 UTC Re: [CAD_CAM_EDM_DRO] Re: geckos lifetime... Lloyd Leung 2002-12-09 17:18:12 UTC RE: [CAD_CAM_EDM_DRO] Re: geckos lifetime...