RE: [CAD_CAM_EDM_DRO] Re: geckos lifetime...
Posted by
Lloyd Leung
on 2002-12-09 17:18:12 UTC
Umm... in the case of cooling compound... LESS it better.
You want to just put a small dab on, and use a razor blade to spread out
a thin even layer works best. This is what all CPU over clocking sites
recommend. You put too much on, it doesn't work as well.
Cheers.
-----Original Message-----
From: Jens Swales <jipeess2000@...> [mailto:jipeess2000@...]
Sent: December 9, 2002 16:58
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Re: geckos lifetime...
thanks for your inputs!
ok folks, i´ll give them a try...
is a 400x500x8 mm piece of alu ok, for 3 vertically mounted 201´s
without fan but with plenty of coolingcompound, running at 6 amps?
js
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
You want to just put a small dab on, and use a razor blade to spread out
a thin even layer works best. This is what all CPU over clocking sites
recommend. You put too much on, it doesn't work as well.
Cheers.
-----Original Message-----
From: Jens Swales <jipeess2000@...> [mailto:jipeess2000@...]
Sent: December 9, 2002 16:58
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Re: geckos lifetime...
thanks for your inputs!
ok folks, i´ll give them a try...
is a 400x500x8 mm piece of alu ok, for 3 vertically mounted 201´s
without fan but with plenty of coolingcompound, running at 6 amps?
js
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Discussion Thread
Jens Swales <jipeess2000@y...
2002-12-08 15:10:00 UTC
lifetime...
Robert Campbell
2002-12-08 15:22:31 UTC
Re: [CAD_CAM_EDM_DRO] lifetime...
dvideohd <jrobinson46@c...
2002-12-08 17:43:44 UTC
Re: lifetime...
JanRwl@A...
2002-12-08 18:34:27 UTC
Re: [CAD_CAM_EDM_DRO] lifetime...
Jens Swales <jipeess2000@y...
2002-12-09 00:06:28 UTC
Re: geckos lifetime...
caudlet <tom@t...
2002-12-09 07:11:17 UTC
Re: geckos lifetime...
JanRwl@A...
2002-12-09 13:46:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: geckos lifetime...
Jens Swales <jipeess2000@y...
2002-12-09 13:58:03 UTC
Re: geckos lifetime...
JanRwl@A...
2002-12-09 14:59:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: geckos lifetime...
Lloyd Leung
2002-12-09 17:18:12 UTC
RE: [CAD_CAM_EDM_DRO] Re: geckos lifetime...