Re: [CAD_CAM_EDM_DRO]transformer

----- Original Message -----
From: <motovidia@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, December 16, 2002 4:55 PM
Subject: Re: [CAD_CAM_EDM_DRO]transformer


> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Robert Campbell" <bob@c...>
> wrote:
> >
> > I need a good source for a torodial power transformer 48 volts at
> 8 to 10
> > amps.
> >
> > I normally get mine from Plitron, but the lead time is about 4
> weeks. A 48
> > volt secondary should be common.
> >
> > I plan on making several 24" by 24" CNC routers.
> >
> > Bob Campbell
>
> Bob,
> have you tried any of the following:
> www.avellindberg.com
> www.toroid.com
> www.powertoroid.com
>
> Good luck,
> Femi
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>