Re: [CAD_CAM_EDM_DRO]transformer

Allied electronics have some in stock

http://www.alliedelec.com/cart/partlookup.asp

Search By Manufacturer's Part Number Containing: 182S24

I used the same transformer in parallel for 24V 20A. You can use it
in series 48V 10A.
The manufacturer of the transformer is Hammond
Here is their website
http://www.hammondmfg.com/182.htm

Kim


--- In CAD_CAM_EDM_DRO@yahoogroups.com, "motovidia <motovidia@a...>"
<motovidia@a...> wrote:

> Bob,
>
> any luck in finding transformers?
> What was the experience like dealing with some of those companies?
>
> Femi
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Robert Campbell"

<bob@c...>

> wrote:
> > Femi,
> >
> > Thanks, this will help.
> >
> > Bob Campbell
> >
> > ----- Original Message -----
> > From: <motovidia@a...>
> > To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> > Sent: Monday, December 16, 2002 4:55 PM
> > Subject: Re: [CAD_CAM_EDM_DRO]transformer
> >
> >
> > > --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Robert Campbell"
> <bob@c...>
> > > wrote:
> > > >
> > > > I need a good source for a torodial power transformer 48

volts

> at
> > > 8 to 10
> > > > amps.
> > > >
> > > > I normally get mine from Plitron, but the lead time is about 4
> > > weeks. A 48
> > > > volt secondary should be common.
> > > >
> > > > I plan on making several 24" by 24" CNC routers.
> > > >
> > > > Bob Campbell
> > >
> > > Bob,
> > > have you tried any of the following:
> > > www.avellindberg.com
> > > www.toroid.com
> > > www.powertoroid.com
> > >
> > > Good luck,
> > > Femi
> > >
> > >
> > > Addresses:
> > > FAQ: http://www.ktmarketing.com/faq.html
> > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > >
> > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@a...
> > > Moderator: jmelson@a... timg@k... [Moderator]
> > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > >
> > > OFF Topic POSTS: General Machining
> > > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> reach it if
> > you have trouble.
> > > http://www.metalworking.com/news_servers.html
> > >
> > > http://groups.yahoo.com/group/jobshophomeshop I consider this
> to be a
> > sister site to the CCED group, as many of the same members are
> there, for OT
> > subjects, that are not allowed on the CCED list.
> > >
> > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> POSTING THEM.
> > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > > bill
> > > List Mom
> > > List Owner
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >