CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Don't give up!!!

on 2003-01-31 13:29:29 UTC
Hi, C.S.

Given a 24 volt transformer, you can expect around 36 Volts DC out of the
bridge rectifier. I'd use a minimum 50 VDC working voltage capacitor for the
power supply. So, while it will work, the 100 VDC capacitor is a little
overkill. However, if you're dealing with surplus electronics houses, you
take what they have as long as it meets the minimum needs.

-- Jerry

> -----Original Message-----
> From: C.S. Mo [mailto:cs@...]
> Sent: Friday, January 31, 2003 8:31 AM
> To: CAD_CAM_EDM_DRO@yahoogroups.com; j.guenther
> Subject: RE: [CAD_CAM_EDM_DRO] Don't give up!!!
>
>
> >24 Volt 10 Amp transformer
> >www.mpja.com MPJA 7846 TR $17.99
> >
> >Bridge Rectifier
> >www.mpja.com MPJA 5248BR $2.70
> >
> >15000uf 100 V Electrolytic Cap
> >www.mouser.com Mouser 539-CGS100V15000 $29.66
>
> Why do you think it is necessary to use a 100V cap for a 24V power
> supply? This is not meant as a criticism - it is a real question! I was
> planning on using a 75V cap for my 45VAC transformer..
>
> Thanks,
>
> --C.S.
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@..., timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this
> to be a sister site to the CCED group, as many of the same
> members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
> EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

Discussion Thread

Fusion X Studio 2003-01-29 11:19:30 UTC Small CNC Laser for Balsa gnrshelton <gnrshelton@y... 2003-01-29 12:08:06 UTC Re: Small CNC Laser for Balsa John Myjak <myjakjs@a... 2003-01-29 13:14:57 UTC Re: Small CNC Laser for Balsa Fusion X Studio 2003-01-29 16:00:05 UTC Re: [CAD_CAM_EDM_DRO] Re: Small CNC Laser for Balsa Peter Seddon 2003-01-30 02:01:12 UTC Re: [CAD_CAM_EDM_DRO] Re: Small CNC Laser for Balsa ballendo <ballendo@y... 2003-01-31 06:51:01 UTC Re: Small CNC Laser for Balsa C.S. Mo 2003-01-31 06:59:36 UTC Re: [CAD_CAM_EDM_DRO] Re: Small CNC Laser for Balsa ballendo <ballendo@y... 2003-01-31 07:11:58 UTC Don't give up!!! wasRe: Small CNC Laser for Balsa Tim Goldstein 2003-01-31 07:46:00 UTC RE: [CAD_CAM_EDM_DRO] Don't give up!!! ballendo <ballendo@y... 2003-01-31 08:01:01 UTC Re: Don't give up!!! j.guenther 2003-01-31 08:24:14 UTC RE: [CAD_CAM_EDM_DRO] Don't give up!!! C.S. Mo 2003-01-31 08:30:51 UTC RE: [CAD_CAM_EDM_DRO] Don't give up!!! ballendo <ballendo@y... 2003-01-31 08:45:43 UTC xylotec xfrmr was Re: Don't give up!!! ballendo <ballendo@y... 2003-01-31 08:50:15 UTC Re: Don't give up!!! Jon Elson 2003-01-31 10:27:25 UTC Re: [CAD_CAM_EDM_DRO] Re: Small CNC Laser for Balsa jeffalanp <xylotex@h... 2003-01-31 10:32:30 UTC Re: Don't give up!!! j.guenther 2003-01-31 10:53:33 UTC RE: [CAD_CAM_EDM_DRO] Re: Don't give up!!! Carol & Jerry Jankura 2003-01-31 13:29:29 UTC RE: [CAD_CAM_EDM_DRO] Don't give up!!!