Re: LCD monitor for CNC controller

Thanks John, I had just left them before posting the original
request. Their cheapest kit is $299. I could get a 15 flat
panel from tigerdirect for $199, assembled, boxed speakers the lot. I
was looking for something even cheaper.


--- In CAD_CAM_EDM_DRO@yahoogroups.com, "j.guenther"
<j.guenther@v...> wrote:

> Try www.earthlcd.com they have all manor of LCD displays, driver

boards and

> what have you. I have been looking at some of their LCD panels for

my

> lunchbox controller PC's that I use in my small shop.
>
> John Guenther
> 'Ye Olde Pen Maker'
> Sterling, Virginia
>
> > -----Original Message-----
> > From: squidsrus85 <squidsrus85@y...> [mailto:squidsrus85@y...]
> > Sent: Saturday, February 08, 2003 13:48 PM
> > To: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subject: [CAD_CAM_EDM_DRO] LCD monitor for CNC controller
> >
> >
> > Hi guys,
> >
> > I have a dos-based control running under win98 using a PCI VGA

color

> > monitor. The entire box weighs a ton and most of the weight is in

the

> > 15" monitor.
> >
> > I am sure a 10" - 12" LCD composite mono monitor would be fine as

the

> > colors on the current VGA screen don't do anything that matters if
> > they were all B&W.
> >
> > Anyone now where I can get an ISA or PCI LCD for something less

than

> > the national debt? I have seen some flat panel displays for around
> > $200, but seem to think there must be some older ex-laptop

displays

> > out there somewhere in the under-100-buck range.
> >
> > Any and all suggestions greatly appreciated.
> >
> >
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> > wanliker@a..., timg@k...
> > Moderator: pentam@c... indigo_red@q... [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> > reach it if you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this
> > to be a sister site to the CCED group, as many of the same
> > members are there, for OT subjects, that are not allowed on the

CCED list.

> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> > POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
> > EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to

http://docs.yahoo.com/info/terms/

> >
> >
> >