Re: LCD monitor for CNC controller

Your best bet may be to watch ebay for a complete VGA or SVGA flat
panel display. Thay can go cheap but you can go a bit crazy keeping
track of them all. Hundreds of lcd panels sell every day. Here is one
that sold recently that would have made a good CNC display.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=3698&item=3400618828&rd=1

The 13" and under color and mono displays are really cheap.
Dean



--- In CAD_CAM_EDM_DRO@yahoogroups.com, "squidsrus85
<squidsrus85@y...>" <squidsrus85@y...> wrote:

> Hi guys,
>
> I have a dos-based control running under win98 using a PCI VGA color
> monitor. The entire box weighs a ton and most of the weight is in the
> 15" monitor.
>
> I am sure a 10" - 12" LCD composite mono monitor would be fine as the
> colors on the current VGA screen don't do anything that matters if
> they were all B&W.
>
> Anyone now where I can get an ISA or PCI LCD for something less than
> the national debt? I have seen some flat panel displays for around
> $200, but seem to think there must be some older ex-laptop displays
> out there somewhere in the under-100-buck range.
>
> Any and all suggestions greatly appreciated.