CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] DRO questions

Posted by j.guenther
on 2003-02-10 07:21:56 UTC
15 inches per second appears to be 900 inches per minute on my calculator.
To me that is some serious speed, and I would think sufficient for a DRO. I
would like to see the arms on the guy that can turn the cranks that fast!

John Guenther
'Ye Olde Pen Maker'
Sterling, Virginia

> -----Original Message-----
> From: Hans Wedemeyer [mailto:xyz@...]
> Sent: Monday, February 10, 2003 9:22 AM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] DRO questions
>
>
> Bolt Hole Pattern:
> I see several DRO's have a feature for Bolt Hole Pattern.
> If a DRO output is not connected to a controller of a mill how
> does it help in doing a Bolt Hole Pattern ?
> Just how is it used ?
>
> Tracking Speed:
> I'm getting feedback that my design needs to be faster than 15
> inches per second.
> Is 15 inches per second a serious limitation ?
> If it is a serious limitation, then what should I aim for as a
> tracking speed ?
>
> I've checked out several commercial DRO's and many do not even
> mention that as a specification !
>
> Best Regards
> Hans Wedemeyer
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@..., timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this
> to be a sister site to the CCED group, as many of the same
> members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
> EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

Discussion Thread

Carey L. Culpepper 2000-07-04 12:54:10 UTC DRO questions Hans Wedemeyer 2003-02-10 06:22:40 UTC DRO questions j.guenther 2003-02-10 07:21:56 UTC RE: [CAD_CAM_EDM_DRO] DRO questions Doug Fortune 2003-02-10 07:48:53 UTC Re: [CAD_CAM_EDM_DRO] DRO questions RichD 2003-02-10 07:55:21 UTC Re: [CAD_CAM_EDM_DRO] DRO questions Hans Wedemeyer 2003-02-10 10:27:45 UTC Re: [CAD_CAM_EDM_DRO] DRO questions Hans Wedemeyer 2003-02-10 10:35:40 UTC Re: [CAD_CAM_EDM_DRO] DRO questions Hans Wedemeyer 2003-02-10 10:38:09 UTC Re: [CAD_CAM_EDM_DRO] DRO questions JanRwl@A... 2003-02-10 16:58:51 UTC Re: [CAD_CAM_EDM_DRO] DRO questions Hans Wedemeyer 2003-02-10 18:21:05 UTC Re: [CAD_CAM_EDM_DRO] DRO questions Doug Fortune 2003-02-10 18:30:49 UTC Re: [CAD_CAM_EDM_DRO] DRO questions Doug Fortune 2003-02-10 18:44:00 UTC Re: [CAD_CAM_EDM_DRO] DRO questions wanliker@a... 2003-02-10 19:47:51 UTC Re: [CAD_CAM_EDM_DRO] DRO questions Hans Wedemeyer 2003-02-10 20:25:36 UTC Re: [CAD_CAM_EDM_DRO] DRO questions Hans Wedemeyer 2003-02-10 20:29:02 UTC Re: [CAD_CAM_EDM_DRO] DRO questions