Re: [CAD_CAM_EDM_DRO] DRO questions
Posted by
Doug Fortune
on 2003-02-10 18:30:49 UTC
Hans Wedemeyer wrote:
Lets presume a guy has 2/10 thou linear scales (as we do).
Now going to the next hole, he tries to get a setting of
(0.0000 , 0.0000) but that takes a whole minute playing
with the handcranks and drives you nuts, whereas getting
approximately there to (say) (0.0002 . -0.0004 ) justs
takes seconds and is 'good enough' for most things. Time
is money!
To clarify my point, I am suggesting (upon going to the
next point), you take into account he is currently at
(.0002 , -0.0004 ) and not ( 0.0000 ,0.0000 ) when you
add the new offsets. Otherwise the accumulated error
will kill you.
I know you are thinking to yourself (just take the extra
time and set it to 0.0000 , 0.0000 ) but I can tell you
in practice, attention to that level of detail wears off
in a hurry and will be a source of great annoyance if
that is how you need to operate it to avoid accumulated
errors!
best regards
Doug Fortune
http://www.cncKITS.com
.
>Let me clarify:
> Doug,
> Thanks for the info.
> About background counters to compensate for errors !
> All the features I'm adding that one is not going to happen.
Lets presume a guy has 2/10 thou linear scales (as we do).
Now going to the next hole, he tries to get a setting of
(0.0000 , 0.0000) but that takes a whole minute playing
with the handcranks and drives you nuts, whereas getting
approximately there to (say) (0.0002 . -0.0004 ) justs
takes seconds and is 'good enough' for most things. Time
is money!
To clarify my point, I am suggesting (upon going to the
next point), you take into account he is currently at
(.0002 , -0.0004 ) and not ( 0.0000 ,0.0000 ) when you
add the new offsets. Otherwise the accumulated error
will kill you.
I know you are thinking to yourself (just take the extra
time and set it to 0.0000 , 0.0000 ) but I can tell you
in practice, attention to that level of detail wears off
in a hurry and will be a source of great annoyance if
that is how you need to operate it to avoid accumulated
errors!
best regards
Doug Fortune
http://www.cncKITS.com
.
Discussion Thread
Carey L. Culpepper
2000-07-04 12:54:10 UTC
DRO questions
Hans Wedemeyer
2003-02-10 06:22:40 UTC
DRO questions
j.guenther
2003-02-10 07:21:56 UTC
RE: [CAD_CAM_EDM_DRO] DRO questions
Doug Fortune
2003-02-10 07:48:53 UTC
Re: [CAD_CAM_EDM_DRO] DRO questions
RichD
2003-02-10 07:55:21 UTC
Re: [CAD_CAM_EDM_DRO] DRO questions
Hans Wedemeyer
2003-02-10 10:27:45 UTC
Re: [CAD_CAM_EDM_DRO] DRO questions
Hans Wedemeyer
2003-02-10 10:35:40 UTC
Re: [CAD_CAM_EDM_DRO] DRO questions
Hans Wedemeyer
2003-02-10 10:38:09 UTC
Re: [CAD_CAM_EDM_DRO] DRO questions
JanRwl@A...
2003-02-10 16:58:51 UTC
Re: [CAD_CAM_EDM_DRO] DRO questions
Hans Wedemeyer
2003-02-10 18:21:05 UTC
Re: [CAD_CAM_EDM_DRO] DRO questions
Doug Fortune
2003-02-10 18:30:49 UTC
Re: [CAD_CAM_EDM_DRO] DRO questions
Doug Fortune
2003-02-10 18:44:00 UTC
Re: [CAD_CAM_EDM_DRO] DRO questions
wanliker@a...
2003-02-10 19:47:51 UTC
Re: [CAD_CAM_EDM_DRO] DRO questions
Hans Wedemeyer
2003-02-10 20:25:36 UTC
Re: [CAD_CAM_EDM_DRO] DRO questions
Hans Wedemeyer
2003-02-10 20:29:02 UTC
Re: [CAD_CAM_EDM_DRO] DRO questions