Re: fixture crane

Personally I like the small chain hoists, not a lot of cost
difference, IMO easier control.

Bernard

> Steve,
> The easiest way to solve your problem, is to screw a large

size eye

> hook into an overhead joist, and hang a "Come-Along" from that. A

1000 lb.

> "Come-Along" is all you'd need, and they're pretty reasonable in

price.

>
> Marv Frankel
> Los Angeles
>
> ----- Original Message -----
> From: <doveknives@a...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Thursday, February 13, 2003 4:45 PM
> Subject: [CAD_CAM_EDM_DRO] fixture crane
>
>
> > I want to build a jib or swing arm type crane to handle lathe

chucks and

> milling fixtures in my shop. What recommendations would you have?

Have any

> of you built anything like this for your shops? I want to make it

to handle

> only about 200-300# since that is as big as I can imagine I will

need to

> lift at this time. Work area around my machines is too tight for a

fork

> lift and I cannot get a a cherry picker's base under the lathe

bed. I was

> thinking about something mounted behind the lathe and or mills or

from the

> ceiling.
> > Any advice is taken as very much appreciated.
> >
> >
> >
> > Trusting HIM,
> > Steve Rollert
> > keenedgeknives.com
> > doveknives.com
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,

wanliker@a...,

> timg@k...
> > Moderator: pentam@c... indigo_red@q... [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to

reach it if

> you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this

to be a

> sister site to the CCED group, as many of the same members are

there, for OT

> subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY

POSTING THEM.

> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to

http://docs.yahoo.com/info/terms/

> >