Re: [CAD_CAM_EDM_DRO] Digest Number 2937 - Steps per inch
Posted by
Daniel J. Statman
on 2003-02-15 22:38:24 UTC
Looks like you have about 0.0045" (72 steps) of backlash.
Daniel J. Statman, Statman Designs
www.statmandesigns.com
dan.statman@...
Daniel J. Statman, Statman Designs
www.statmandesigns.com
dan.statman@...
----- Original Message -----
From: "P. J. Hicks" <hickspj467@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, February 15, 2003 10:59 PM
Subject: [CAD_CAM_EDM_DRO] Digest Number 2937 - Steps per inch
> In following the discussion on calculation vs. trial and error setting of
> the spi I would like to relate my experience and ask if it makes sense or
is
> way out of line.
>
> I initially set the spi by calculation; sherline supplied standard lead
> screws 20 tpi X 200 steps per motor revolution X 4x stepping equals 16000
> steps per inch, Correct?
>
> However when I measured the travel (at several places along the axis)
using
> MDI commands my dial indicator repeatedly indicated that 16070 steps were
> necessary to get 1 inch of travel. Similar experience (slightly different
> numbers) on the other axis. Does this sound reasonable or do I have
> something to track down? And what might it be?
>
> PJH
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
Discussion Thread
P. J. Hicks
2003-02-15 20:20:35 UTC
Digest Number 2937 - Steps per inch
Lloyd Leung
2003-02-15 20:38:53 UTC
RE: Digest Number 2937 - Steps per inch
Tim Goldstein
2003-02-15 20:44:24 UTC
RE: [CAD_CAM_EDM_DRO] Digest Number 2937 - Steps per inch
Daniel J. Statman
2003-02-15 22:38:24 UTC
Re: [CAD_CAM_EDM_DRO] Digest Number 2937 - Steps per inch
Jon Elson
2003-02-15 22:46:34 UTC
Re: [CAD_CAM_EDM_DRO] Digest Number 2937 - Steps per inch
Carol & Jerry Jankura
2003-02-16 06:16:24 UTC
RE: [CAD_CAM_EDM_DRO] Digest Number 2937 - Steps per inch
Hoyt McKagen
2003-02-16 07:07:22 UTC
Re: [CAD_CAM_EDM_DRO] Digest Number 2937 - Steps per inch
torsten98001 <torsten@g...
2003-02-16 17:08:00 UTC
Re: Digest Number 2937 - Steps per inch