CAD CAM EDM DRO - Yahoo Group Archive

Re: making a digitizer probe

on 2003-02-20 05:36:16 UTC
I had envisioned chucking up a piece of steel in a nylon collet and
running a wire to the probe. The other end to the part. then
whenever there is contact, the input changes state.

Dave



--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Graham Stabler <eexgs@n...>"
<eexgs@n...> wrote:
> I'd like to try and make myself a digitizer probe now that my mill
is
> up and running but am not sure of how to go about it. So far I
have
> come up with the idea of having a pointed probe running on a little
> precision slide that will block a slotted opto sensor when the tip
is
> depressed.
>
> I'm not sure of the best way to get repeatability but I already
have
> a tiny little THK slide that might form a basis of the unit.
Having
> said that it would not mount easily into the tool holder.
>
> Anyone done this?
>
> Cheers,
>
> Graham Stabler
>
> www.indoor.flyer.co.uk

Discussion Thread

Graham Stabler <eexgs@n... 2003-02-20 04:15:15 UTC making a digitizer probe turbulatordude <davemucha@j... 2003-02-20 05:36:16 UTC Re: making a digitizer probe Graham Stabler <eexgs@n... 2003-02-20 05:50:12 UTC Re: making a digitizer probe Hoyt McKagen 2003-02-20 07:19:53 UTC Re: [CAD_CAM_EDM_DRO] Re: making a digitizer probe ballendo <ballendo@y... 2003-02-20 08:12:40 UTC Re: making a digitizer probe Carlos Guillermo 2003-02-20 08:43:56 UTC RE: [CAD_CAM_EDM_DRO] Re: making a digitizer probe Alan Marconett KM6VV 2003-02-20 10:53:24 UTC Re: [CAD_CAM_EDM_DRO] making a digitizer probe Graham Stabler <eexgs@n... 2003-02-20 12:43:05 UTC Re: making a digitizer probe dvideohd <jrobinson46@c... 2003-02-23 16:50:48 UTC Re: making a digitizer probe