CAD CAM EDM DRO - Yahoo Group Archive

Re: Transformers: was Power supply question

on 2003-02-20 07:25:03 UTC
Ballendo,

I have found discarded UPSs an excellent source for transformers. I
have one that came out of a 1.5kW system, gives 33 VAC, the ouput is
3 parallel 14 gage solid copper leads, never been able to fully load
it, must be about 40+ amps.. I picked up another at the local re-
cyle yard, 14.4 VAC ouput rated for 750 watts, $3.00.

Bernard

> Joachim,
>
> I use at least 2000uf per amp for 297/298 designs. Although the
gecko
> white paper says it is okay to use less for GECKO drives, I have
> found that these particular chips "prefer" a smoother DC.
>
> (I'm sometimes a bit confused when a paper written with the needs
of
> a particular drive is presented as the "truth" for ALL drives.
> Admirably, Mariss, who wrote the paper(s) does not do this. So
> although some parts of the Gecko White papers are of general use,
> don't forget that they are written from a "gecko" perspective. And
> although Mariss is a genius in drives, IMO; he's still selling his
> product.)
>
> Hope this helps,
>
> Ballendo
>
> P.S. Offlist, could you tell me where you got your transformer?
>

Discussion Thread

Joachim Reif <joachim.reif@t... 2003-02-19 08:41:57 UTC Power supply question Robert Campbell 2003-02-19 10:45:01 UTC Re: [CAD_CAM_EDM_DRO] Power supply question JanRwl@A... 2003-02-19 15:21:20 UTC Re: [CAD_CAM_EDM_DRO] Power supply question ballendo <ballendo@y... 2003-02-20 06:08:31 UTC Re: Power supply question Bernard R <bwjarandall@c... 2003-02-20 07:25:03 UTC Re: Transformers: was Power supply question turbulatordude <davemucha@j... 2003-02-20 08:14:22 UTC UPS as source for transformers ( was Re: Transformers: was Power supply question Bernard R <bwjarandall@c... 2003-02-20 08:47:10 UTC UPS as source for transformers ( was Re: Transformers: was Power supply question