CAD CAM EDM DRO - Yahoo Group Archive

Re: RE: DRO/cable source

Posted by D.F.S.
on 2000-02-25 09:04:29 UTC
>
> From: wanliker@...
>
> I just looked in the issue #101 of McMaster Carr, they have coated aircraft
> cable as follows:
> Galvanized.
> 7x7 strand 1/16 coated nylon or clear vinyl, breaking strength 270 pounds.
> 7x7 strand 3/32 coated nylon or clear vinyl, breaking strength 480 pounds.
>
> Stainless steel, same coatings, same strength, about 25% higher.
>
> Both are indicated as available in cut lengths, 50 foot rolls, or 250 foot
> spools.
>
This stuff sounds a bit stiff to me.

Doesn't it need to make several wraps around a 5mm Shaft?

This may be dated, but is "Tuning Cord" or similar string to
be had anymore.

(This stuff was the line used to tune old variable Cap radios
with the moving pointer and rotating knobs)

I would think the idea about the coated wire fishing line would be
the most readily avalible to most people, and probably relatively
cheap.

Marc

Discussion Thread

wanliker@a... 2000-02-24 23:39:42 UTC Re: RE: DRO/cable source D.F.S. 2000-02-25 09:04:29 UTC Re: RE: DRO/cable source Darrell 2000-02-25 10:22:32 UTC Re: RE: DRO/cable source Bertho Boman 2000-02-25 11:05:28 UTC Re: RE: DRO/cable source Darrell 2000-02-25 15:40:01 UTC Re: RE: DRO/cable source A. G. Eckstein 2000-02-25 16:30:52 UTC Re: RE: DRO/cable source A. G. Eckstein 2000-02-25 16:51:26 UTC Re: RE: DRO/cable source