Re: RE: DRO/cable source

Vinyl would be softer than nylon and should not slip as much as nylon.
Darrell

----- Original Message -----
From: <wanliker@...>
To: <CAD_CAM_EDM_DRO@onelist.com>
Sent: Thursday, February 24, 2000 11:39 PM
Subject: Re: [CAD_CAM_EDM_DRO] RE: DRO/cable source


> From: wanliker@...
>
> I just looked in the issue #101 of McMaster Carr, they have coated
aircraft
> cable as follows:
> Galvanized.
> 7x7 strand 1/16 coated nylon or clear vinyl, breaking strength 270
pounds.
> 7x7 strand 3/32 coated nylon or clear vinyl, breaking strength 480
pounds.
>
> Stainless steel, same coatings, same strength, about 25% higher.
>
> Both are indicated as available in cut lengths, 50 foot rolls, or 250 foot
> spools.
>
> Call 1-310-692-5911 for prices, and to order.
> Also on the net, sales@...
>
> My question is which coating would be better??
> bill
>
> ------------------------------------------------------------------------
> Get what you deserve with NextCard Visa! ZERO! Rates as low as
> 0.0% Intro APR, online balance transfers, Rewards Points, no
> hidden fees, and much more! Get NextCard today and get the credit
> you deserve! Apply now! Get your NextCard Visa at:
> http://click.egroups.com/1/966/2/_/423600/_/951464393/
> ------------------------------------------------------------------------
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems in the above catagories.
> To Unsubscribe, read archives, change to or from digest.
> Go to: http://www.onelist.com/isregistered.cgi
> Log on, and you will go to Member Center, and you can make changes there.
> For the FAQ, go to http://www.ktmarketing.com/faq.html
> bill,
> List Manager
>
>