CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Inexpensive oscilloscope?

Posted by halle@t...
on 2003-03-08 13:53:48 UTC
For super-simple (and super-inexpensive) scope, check out files/scope3.zip

/Halle

----- Original Message -----
From: "Dan Mauch" <dmauch@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, March 08, 2003 10:26 PM
Subject: RE: [CAD_CAM_EDM_DRO] Inexpensive oscilloscope?


>
> You really don't need a scope to set the dampening on the G320/G340. I
> been setting them using a method that I described in earlier post on the
> same subject. Just use a flywheel mounted on the shaft and the results
> can be the same. You will probably need to check the archieves to find
> it.
> Dan
> -----Original Message-----
> From: Monte Westlund [mailto:montejw@...]
> Sent: Friday, March 07, 2003 8:25 PM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] Inexpensive oscilloscope?
>
>
> Would one of these work for testing/tuning Gecko 320 drivers? They
> look to have output to a computer such as a real oscilloscope does. A
> couple down at the bottom of this page:
> http://www.electronic-supply.com/DMM-page.htm
>
> Monte
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there,
> for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill
> List Mom List Owner
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

Discussion Thread

Monte Westlund 2003-03-07 20:25:20 UTC Inexpensive oscilloscope? Jon Elson 2003-03-07 22:23:57 UTC Re: [CAD_CAM_EDM_DRO] Inexpensive oscilloscope? tony@j... 2003-03-07 22:54:29 UTC Re: Inexpensive oscilloscope? Monte Westlund 2003-03-07 23:04:25 UTC Re: Inexpensive oscilloscope? tony@j... 2003-03-07 23:07:48 UTC Re: Inexpensive oscilloscope? Keith Bowers 2003-03-08 13:07:08 UTC Re: [CAD_CAM_EDM_DRO] Re: Inexpensive oscilloscope? Dan Mauch 2003-03-08 13:43:42 UTC RE: [CAD_CAM_EDM_DRO] Inexpensive oscilloscope? halle@t... 2003-03-08 13:53:48 UTC Re: [CAD_CAM_EDM_DRO] Inexpensive oscilloscope?