Re: Inexpensive oscilloscope?
Posted by
tony@j...
on 2003-03-07 23:07:48 UTC
Monte Westlund writes:
need anything fancy to run it as long as it will run Windows.
Regards,
Tony
>Or maybe better, use a second (low power) PC for the 'scope - you don't
> > You might consider one of the PC-based 'scopes from these guys
> though:
> >
> > http://www.picotech.com/
> >
> > I have one of their ADC 200 units & have found it very useful
> indeed. They
> > also do a much cheaper unit called "DrDAQ" (http://www.drdaq.com/)
> that is
> > capable of use as an oscilloscope for low frequency waveforms
> (i.e., of the
> > order of 10K Hz and below).
> >
> > Regards,
> > Tony
>
> Tony,
> I also found those. I'd have to hook up another parallel port, one
> for the controller and one for the scope. Not the end of the world I
> suppose.
>
need anything fancy to run it as long as it will run Windows.
Regards,
Tony
Discussion Thread
Monte Westlund
2003-03-07 20:25:20 UTC
Inexpensive oscilloscope?
Jon Elson
2003-03-07 22:23:57 UTC
Re: [CAD_CAM_EDM_DRO] Inexpensive oscilloscope?
tony@j...
2003-03-07 22:54:29 UTC
Re: Inexpensive oscilloscope?
Monte Westlund
2003-03-07 23:04:25 UTC
Re: Inexpensive oscilloscope?
tony@j...
2003-03-07 23:07:48 UTC
Re: Inexpensive oscilloscope?
Keith Bowers
2003-03-08 13:07:08 UTC
Re: [CAD_CAM_EDM_DRO] Re: Inexpensive oscilloscope?
Dan Mauch
2003-03-08 13:43:42 UTC
RE: [CAD_CAM_EDM_DRO] Inexpensive oscilloscope?
halle@t...
2003-03-08 13:53:48 UTC
Re: [CAD_CAM_EDM_DRO] Inexpensive oscilloscope?