CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: 187 oz-in steppers for 34.95?

Posted by alex
on 2003-03-16 12:03:51 UTC
Great,
thank you.
Alex
----- Original Message -----
From: turbulatordude <davemucha@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, March 15, 2003 10:22 PM
Subject: [CAD_CAM_EDM_DRO] Re: 187 oz-in steppers for 34.95?


> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "alex" <telecomt@t...> wrote:
> > Kewin,
> > what is the part#?
> > Alex
>
>
> go to the site
> on the left column, check motors,
> then stepping motors,
> I think it is on the last page of stepping motors.
>
>
>
>
>
>
>
>
> > ----- Original Message -----
> > From: kevin53901 <kevinh@w...>
> > To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> > Sent: Friday, March 14, 2003 9:14 PM
> > Subject: [CAD_CAM_EDM_DRO] 187 oz-in steppers for 34.95?
> >
> >
> > > The reason I ask about these 187 oz-in motors is that I found them
> > > here www.herbach.com for only 34.95 each!!!! I guess I'll order 3
> > > seeing as that they should work just fine. Very cheap price or am
> I
> > > missing something here? Thanks all for the info.
> > >
> > > Kevin
> > >
> > > --- In CAD_CAM_EDM_DRO@yahoogroups.com, "kevin53901" <kevinh@w...>
> > > wrote:
> > > > I am a newcomer to the home-built CNC hobby. I am currently in
> the
> > > > process of planning the build-up of my CNC-ready Taig mill. I'm
> > > still
> > > > debating over controllers but leaning towards Xylotex. I'm on
> the
> > > > search for stepper motors and have found many different kinds.
> I've
> > > > read through the CNC for Hobbyists document and I'm stuck on the
> > > part
> > > > that covers the number of steps per rev. Am I only looking for
> 200
> > > > step motors or can I also use 400 step motors? From reading the
> on
> > > the
> > > > Xylotex website I see that it can be configured for full, 1/2,
> 1/4,
> > > > and 1/8 step. Will this alllow me to use motors besides a 200
> step?
> > > > Will this mean higher resolution? I have found a motor (Vexta
> > > > #PK268M-02A) Rated around 190 oz-in. 4.5 VDC, 2 Amps, 400
> > > Steps/Rev,
> > > > Step Angle 0.9°, 6 Wire Leads, 2.25 Ohms. Does this sound like a
> > > > possible chioce to match up with this controller? Also, does
> > > anybody
> > > > have a source for a housing for the controller, power supply and
> > > misc.?
> > > >
> > > > Thanks,
> > > > Kevin
> > >
> > >
> > >
> > > Addresses:
> > > FAQ: http://www.ktmarketing.com/faq.html
> > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > >
> > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@a...,
> > timg@k...
> > > Moderator: pentam@c... indigo_red@q... [Moderators]
> > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > >
> > > OFF Topic POSTS: General Machining
> > > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> reach it if
> > you have trouble.
> > > http://www.metalworking.com/news_servers.html
> > >
> > > http://groups.yahoo.com/group/jobshophomeshop I consider this
> to be a
> > sister site to the CCED group, as many of the same members are
> there, for OT
> > subjects, that are not allowed on the CCED list.
> > >
> > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> POSTING THEM.
> > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > > bill
> > > List Mom
> > > List Owner
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

Discussion Thread

kevin53901 2003-03-13 14:46:18 UTC Newbie to CNC - 400 step/rev motors Tim Goldstein 2003-03-13 15:13:44 UTC RE: [CAD_CAM_EDM_DRO] Newbie to CNC - 400 step/rev motors Alan Marconett KM6VV 2003-03-13 16:04:42 UTC Re: [CAD_CAM_EDM_DRO] Newbie to CNC - 400 step/rev motors JanRwl@A... 2003-03-13 17:48:28 UTC Re: [CAD_CAM_EDM_DRO] Newbie to CNC - 400 step/rev motors JanRwl@A... 2003-03-13 17:50:13 UTC Re: [CAD_CAM_EDM_DRO] Newbie to CNC - 400 step/rev motors vavaroutsos 2003-03-13 20:25:54 UTC Re: Newbie to CNC - 400 step/rev motors Jon Elson 2003-03-13 22:30:08 UTC Re: [CAD_CAM_EDM_DRO] Newbie to CNC - 400 step/rev motors kevin53901 2003-03-14 20:28:26 UTC 187 oz-in steppers for 34.95? Tim Goldstein 2003-03-14 22:17:39 UTC RE: [CAD_CAM_EDM_DRO] 187 oz-in steppers for 34.95? Jim Brown 2003-03-15 01:30:17 UTC Re: [CAD_CAM_EDM_DRO] 187 oz-in steppers for 34.95? alex 2003-03-15 17:24:27 UTC Re: [CAD_CAM_EDM_DRO] 187 oz-in steppers for 34.95? turbulatordude 2003-03-15 19:22:54 UTC Re: 187 oz-in steppers for 34.95? kevin53901 2003-03-15 20:55:50 UTC Re: 187 oz-in steppers for 34.95? alex 2003-03-16 12:03:51 UTC Re: [CAD_CAM_EDM_DRO] Re: 187 oz-in steppers for 34.95? alex 2003-03-16 12:25:07 UTC Re: [CAD_CAM_EDM_DRO] Re: 187 oz-in steppers for 34.95? Mehmet Gogus 2003-03-17 00:50:19 UTC RE: [CAD_CAM_EDM_DRO] Re: 187 oz-in steppers for 34.95? kevin53901 2003-03-17 06:57:30 UTC Re: 187 oz-in steppers for 34.95? Mehmet Gogus 2003-03-20 07:12:17 UTC RE: [CAD_CAM_EDM_DRO] Re: 187 oz-in steppers for 34.95? kevin53901 2003-03-20 15:56:26 UTC Re: 187 oz-in steppers for 34.95? turbulatordude 2003-03-20 17:01:19 UTC Re: 187 oz-in steppers for 34.95? John Guenther 2003-03-20 18:31:00 UTC RE: [CAD_CAM_EDM_DRO] Re: 187 oz-in steppers for 34.95?