Re: 187 oz-in steppers for 34.95?

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "alex" <telecomt@t...> wrote:
> Kewin,
> what is the part#?
> Alex
> ----- Original Message -----
> From: kevin53901 <kevinh@w...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Friday, March 14, 2003 9:14 PM
> Subject: [CAD_CAM_EDM_DRO] 187 oz-in steppers for 34.95?
>
>
> > The reason I ask about these 187 oz-in motors is that I found them
> > here www.herbach.com for only 34.95 each!!!! I guess I'll order 3
> > seeing as that they should work just fine. Very cheap price or am
I
> > missing something here? Thanks all for the info.
> >
> > Kevin
> >
> > --- In CAD_CAM_EDM_DRO@yahoogroups.com, "kevin53901" <kevinh@w...>
> > wrote:
> > > I am a newcomer to the home-built CNC hobby. I am currently in
the
> > > process of planning the build-up of my CNC-ready Taig mill. I'm
> > still
> > > debating over controllers but leaning towards Xylotex. I'm on
the
> > > search for stepper motors and have found many different kinds.
I've
> > > read through the CNC for Hobbyists document and I'm stuck on the
> > part
> > > that covers the number of steps per rev. Am I only looking for
200
> > > step motors or can I also use 400 step motors? From reading the
on
> > the
> > > Xylotex website I see that it can be configured for full, 1/2,
1/4,
> > > and 1/8 step. Will this alllow me to use motors besides a 200
step?
> > > Will this mean higher resolution? I have found a motor (Vexta
> > > #PK268M-02A) Rated around 190 oz-in. 4.5 VDC, 2 Amps, 400
> > Steps/Rev,
> > > Step Angle 0.9°, 6 Wire Leads, 2.25 Ohms. Does this sound like a
> > > possible chioce to match up with this controller? Also, does
> > anybody
> > > have a source for a housing for the controller, power supply and
> > misc.?
> > >
> > > Thanks,
> > > Kevin
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
wanliker@a...,
> timg@k...
> > Moderator: pentam@c... indigo_red@q... [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to
reach it if
> you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this
to be a
> sister site to the CCED group, as many of the same members are
there, for OT
> subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >