Re: [CAD_CAM_EDM_DRO] Re: Photoflash capacitors for EDM use
Posted by
Larry Edington
on 2003-03-19 17:09:21 UTC
There is a difference in capacitors rated for run versus start only. The
run rated caps are what you want for EDM
as the start only rated caps might not withstand the repeated charge /
discharge cycles.
If the caps are rated start / run, then they should be ok.
You wouldn't want to use a start rated cap in a motor run application. I've
seen that result in exploded caps and smoked motors.
later,
Larry Edington
run rated caps are what you want for EDM
as the start only rated caps might not withstand the repeated charge /
discharge cycles.
If the caps are rated start / run, then they should be ok.
You wouldn't want to use a start rated cap in a motor run application. I've
seen that result in exploded caps and smoked motors.
later,
Larry Edington
----- Original Message -----
From: "turbulatordude" <davemucha@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, March 19, 2003 6:19 PM
Subject: [CAD_CAM_EDM_DRO] Re: Photoflash capacitors for EDM use
> Motor start/run capacitor ? I thought a start was typically an
> electrolytic or similar and the run was a poly metalized film. Start
> and run caps that I have looked at had large differences in
> capacities.
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
Discussion Thread
Richard
2003-03-17 10:45:53 UTC
Photoflash capacitors for EDM use
wanliker@a...
2003-03-17 11:13:05 UTC
Re: [CAD_CAM_EDM_DRO] Photoflash capacitors for EDM use
Bill Higdon
2003-03-17 16:08:58 UTC
Re: [CAD_CAM_EDM_DRO] Photoflash capacitors for EDM use
turbulatordude
2003-03-17 19:51:39 UTC
Re: Photoflash capacitors for EDM use
wanliker@a...
2003-03-17 21:17:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: Photoflash capacitors for EDM use
Jon Elson
2003-03-17 21:44:47 UTC
Re: [CAD_CAM_EDM_DRO] Photoflash capacitors for EDM use
Kevin P. Martin
2003-03-18 06:43:29 UTC
RE: [CAD_CAM_EDM_DRO] Re: Photoflash capacitors for EDM use
turbulatordude
2003-03-18 07:51:37 UTC
Re: Photoflash capacitors for EDM use
Dave Dillabough
2003-03-18 11:09:43 UTC
Re: [CAD_CAM_EDM_DRO] Photoflash capacitors for EDM use
turbulatordude
2003-03-18 17:18:29 UTC
Re: Photoflash capacitors for EDM use
Jon Elson
2003-03-18 22:44:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: Photoflash capacitors for EDM use
Richard
2003-03-19 04:48:03 UTC
Re: Photoflash capacitors for EDM use
turbulatordude
2003-03-19 16:20:12 UTC
Re: Photoflash capacitors for EDM use
Larry Edington
2003-03-19 17:09:21 UTC
Re: [CAD_CAM_EDM_DRO] Re: Photoflash capacitors for EDM use
turbulatordude
2003-03-20 04:55:41 UTC
Sizing Cap's ( was Re: Photoflash capacitors for EDM use
Richard
2003-03-20 05:27:18 UTC
Sizing Cap's ( was Re: Photoflash capacitors for EDM use
Jon Elson
2003-03-20 09:35:47 UTC
Re: [CAD_CAM_EDM_DRO] Sizing Cap's ( was Re: Photoflash capacitors for EDM use