Re: laplink cable

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "James Wilsom"
<jwilson002@a...> wrote:

> I cut an old Laplink cable. I new it would come in handy for

something

> someday. This is one of the kind with a 25 pin connector at each

end not

> the 9 and 25 pin combination at each end. There are 15 conductors

in mine

> so obviuosly 10 of the pins are either dead or share a wire. Hope

this

> helps. What are you trying to do? If you are trying to go from

your

> parallel port to a controller go to Radio Shack and get some 25

conductor

> ribbon cable and some connectors and "roll your own".
>
> JIm

Jim,

Well that figures as pins 18 to 25 inclusive are all tied together as
signal 0

Andrew Mawson
Bromley, Kent, UK