Re: [CAD_CAM_EDM_DRO] Re: old server

In WindowsME, open Control Panel, open Add/Remove Programs icon, click
the Startup Disk tab, then click Create Disk. I'm sure Win98 is the same.
If you have a problem, I'll upload the files to you.

Marv Frankel

----- Original Message -----
From: "andrewyslee" <andrewlee@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, April 12, 2003 11:29 PM
Subject: [CAD_CAM_EDM_DRO] Re: old server


> Hi Marv,
>
> Thanks, that is probably what I will try to do. BTW I vaguely
> understand it is possible to creat such a startup disk from another
> computer with Win 98 or ME. If it is not too much trouble, will
> appreciate a quickie tutorial as to how to do that.
>
> Thanks
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "dcdziner" <Dcdziner@p...>
> wrote:
> > Andrew,
> > If what you're trying to do is install Win98, you might
> have get
> > hold of a Win98 or WinME startup disk, and boot up with that. As it
> boots,
> > it will ask if you want to boot with CD ROM support, at which time
> it will
> > load a generic CD ROM driver. When it finishes booting, it will
> then tell
> > you the drive letter of the CD drive, and you can then access the
> CD disk.
> >
> > Marv Frankel
> > Los Angeles
> >
> > ----- Original Message -----
> > From: "andrewyslee" <andrewlee@s...>
> > To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> > Sent: Saturday, April 12, 2003 10:38 PM
> > Subject: [CAD_CAM_EDM_DRO] Re: old server
> >
> >
> > > Hi Jim,
> > >
> > > What I was trying to say is that the CD is powered up, implying
> the
> > > CD is connected properly, as I could slide the drawer open and put
> > > the CD into the tray. The computer I think was used as a print
> server
> > > (whatever that means) as before I could get to the C: prompt, I
> had
> > > to issue an UNLOAD followed by an EXIT command.
> > >
> > > I think "no logical drive for CD drive" would correctly describe
> the
> > > situation, though I am not 100% sure as I am a bit of a DOS dummy.
> > >
> > > Andrew
> > >
> > > --- In CAD_CAM_EDM_DRO@yahoogroups.com, "James Wilsom"
> > > <jwilson002@a...> wrote:
> > > > Would you explain more clearly. You said you could laod the
> Win98
> > > CD but
> > > > there was no logical drive for the CD drive? Are you currently
> > > runnign
> > > > MSDOS or some Network OS?
> > > >
> > > > Jim
> > >
> > >
> > > Addresses:
> > > FAQ: http://www.ktmarketing.com/faq.html
> > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > >
> > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@a...,
> > timg@k...
> > > Moderator: pentam@c... indigo_red@q... [Moderators]
> > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > >
> > > OFF Topic POSTS: General Machining
> > > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> reach it if
> > you have trouble.
> > > http://www.metalworking.com/news_servers.html
> > >
> > > http://groups.yahoo.com/group/jobshophomeshop I consider this
> to be a
> > sister site to the CCED group, as many of the same members are
> there, for OT
> > subjects, that are not allowed on the CCED list.
> > >
> > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> POSTING THEM.
> > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > > bill
> > > List Mom
> > > List Owner
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>