Re: [CAD_CAM_EDM_DRO] Re: old server

Andrew,
If what you're trying to do is install Win98, you might have get
hold of a Win98 or WinME startup disk, and boot up with that. As it boots,
it will ask if you want to boot with CD ROM support, at which time it will
load a generic CD ROM driver. When it finishes booting, it will then tell
you the drive letter of the CD drive, and you can then access the CD disk.

Marv Frankel
Los Angeles

----- Original Message -----
From: "andrewyslee" <andrewlee@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, April 12, 2003 10:38 PM
Subject: [CAD_CAM_EDM_DRO] Re: old server


> Hi Jim,
>
> What I was trying to say is that the CD is powered up, implying the
> CD is connected properly, as I could slide the drawer open and put
> the CD into the tray. The computer I think was used as a print server
> (whatever that means) as before I could get to the C: prompt, I had
> to issue an UNLOAD followed by an EXIT command.
>
> I think "no logical drive for CD drive" would correctly describe the
> situation, though I am not 100% sure as I am a bit of a DOS dummy.
>
> Andrew
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "James Wilsom"
> <jwilson002@a...> wrote:
> > Would you explain more clearly. You said you could laod the Win98
> CD but
> > there was no logical drive for the CD drive? Are you currently
> runnign
> > MSDOS or some Network OS?
> >
> > Jim
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>