Re: [CAD_CAM_EDM_DRO] Re: Project Box

Guys,
There's a place here in the L.A. area with a couple of walk-in stores
and a web site, www.allcorp.com. A few weeks ago, I was looking for an
enclosure to house a fair sized transformer, a 5V. power supply and a
Xylotex 3-axis driver, plus a fan. Most of the stuff in other electronics
stores were too small, and the stuff on the net was pretty expensive. I
found one at All Electronics here in Koreatown, ideal size, commercial duty,
with perforated ends to mount fans on, for $3.00. Sometimes you have to
search a little. In addition, coming from this great find, I discovered an
audio electronics supplier, who had the slickest 4-conductor panel mount
jacks & plug, for connecting motor cables to my drivers.

Marv Frankel
Los Angeles

----- Original Message -----
From: "jmkasunich" <jmkasunich@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, April 15, 2003 7:47 AM
Subject: [CAD_CAM_EDM_DRO] Re: Project Box


> --- In CAD_CAM_EDM_DRO@yahoogroups.com, Matt Shaver <mshaver@e...>
> wrote:
> > On Sunday 13 April 2003 18:49, Chris L wrote:
> >> Matt Shaver wrote:
> >>>On Sunday 13 April 2003 18:10, Chris L wrote:
> >>>>
> >>>>The cool stuff is made by Rose.
> >>>
> >>> Yes it is, and Carl Faberge made some pretty nice
> >>> Easter eggs too. I doubt I'll ever own any substantial
> >>> quantity of either, and for similar reasons...
> >>>
> >> What we NEED is a properly trained "dumpster diver" in
> >> Maryland
> >
> > Actually, _I_ live in Maryland (Sykesville to be exact),
> > I see that their office is in Frederick, that's not that
> > far from here (20 miles or so). If there was sufficient
> > reason, I could go over there and scrounge up catalogs &
> > samples. I'd even dumpster dive so long as they don't
> > share their dumpster with a restaurant :P .
>
> Actually, I doubt their dumpster would have any good
> stuff in it. The manufacturer of the product rarely
> throws it away. If it's good, they sell it. If it's
> bad, they either crush it or recycle it. You are more
> likely to find usable electrical enclosures at an
> industrial surplus dealer, or at an industrial site
> that is being demolished, or in the dumpster of an
> industrial electrical contractor. You might find some
> at the manufacturer's sales office, if it's far from
> the plant - they might be samples or demos that are
> no longer needed and aren't worth returning to inventory.
>
> John Kasunich
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>