Re: [CAD_CAM_EDM_DRO] Where to Find ?

Here is a place that will cut it to size as well as send you a sample

http://www.isssales.com/multimat.htm

----- Original Message -----
From: "Chris L" <datac@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, April 30, 2003 9:13 PM
Subject: [CAD_CAM_EDM_DRO] Where to Find ?


> With the discussion on workholding recently, I rekindled my desire to
> find a "Cheap" source for that sticky rubber that is used on some
> engraving table tops.
> If you are not familiar with this stuff, it is a fairly typical looking
> rubber mat (usually orange) that you apply to your work area. When you
> want to engrave a nameplate, just set the plate into place and engrave
> away !
>
> It is "Sticky", to any clean, dry metallic material you might want to
> engrave on, and will not allow anything flat to move at all. It is an
> "Active" type of rubber and usually comes with a self adhesive back for
> placement on your table top. It works excellent, and I have a few small
> pieces that were cutoffs from a place I used to work at.
>
> The problem is, Those that sell it hold it out as some real "miracle"
> stuff. Unfortunately they and have attached a "miracle" PRICE to it as
> well !
>
> You can see an example of it here:
http://www.engravingsys.com/MultiMat.htm
>
> I know there has to be a rubber gasket material out there that works the
> same way, but at far, far, FAR less cost.
>
> Anybody ? Great stuff if we can find it for less money !
>
> Chris L
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>