CAD CAM EDM DRO - Yahoo Group Archive

cable suppliers - and the archives

on 2003-05-03 10:33:11 UTC
Hi all,

I need to get 50 feet or so of wire for my table. I had set
everything up with conrtactor 4 conductor 18 ga, but it is not very
flexible and I'm figuring that it will work harden before too long.

I searched the archives and didn't find any links so am asking for
some references to cable suppliers.

My steppers are 5 amps each, so I can get by with less than 18ga.


===============================================================

on another topic, I am thinking of downloading the archives, but can
only do that 100 posts at a time, and then they would not be cross
linked.

Is anybody decent with a database that could offer any advice on how
to dump the text into a notes field, the subject into a key field ?


If you want to see how the pages would be, search on anything, then
hit the expand messages button. that shows 15 posts, but that is the
format and can be changed to 100 posts.

Dave

Discussion Thread

turbulatordude 2003-05-03 10:33:11 UTC cable suppliers - and the archives JanRwl@A... 2003-05-03 10:45:31 UTC Re: [CAD_CAM_EDM_DRO] cable suppliers - and the archives turbulatordude 2003-05-03 18:02:27 UTC Re: cable suppliers - and the archives Randy Gordon-Gilmore 2003-05-03 18:22:49 UTC Re: [CAD_CAM_EDM_DRO] cable suppliers - and the archives turbulatordude 2003-05-04 07:35:42 UTC number of conductors ( was Re: cable suppliers - and the archives Randy Gordon-Gilmore 2003-05-04 18:02:45 UTC Re: number of conductors ( was Re: cable suppliers colin_jet 2003-05-05 07:53:14 UTC Re: cable suppliers - and the archives