Re: High Speed Machining Look ahead EMC
Posted by
Fred Smith
on 2003-05-03 14:04:03 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Leslie M. Watts"
<leswatts@a...> wrote:
...............
VectorCam has some high speed machining tools that might be
interesting to test. We have a special post processor that will add
feedrate reduction and acceleration delays around corners based on
angle of change. The reduction and delay is based on a user
controlled distance. Would you be interested in running some tests
to see if this kind of control could improve the cornering on your
machine?
Best Regards, Fred Smith- IMService
Listserve Special discounts and offers are at:
http://www.imsrv.com/hobby/grp.html
We are THE source for low cost Cad Cam
<leswatts@a...> wrote:
> The typical cutting speed I use of 120 ipm with max 600 ipm rapidsmachining
> (ballscrew critical speed limited) qualifies for high speed
...............
> It could be argued that cutting smoothness is a cam program issueprograms
> rather than a machine controller one. But given that many cam
> that we can afford generate fairly crude machine code it would benice
> to have some options in EMC.smooth
>
> Some external control via the .ini file of interpolation control
> points and basis functions would be nice. In other words have the
> option of controlling the smoothness parameters- and perhaps not
> certain hard corners beyond a certain trajectory change angle. Itwould
> be nice.Les, Hope you are feeling better after surgery.
VectorCam has some high speed machining tools that might be
interesting to test. We have a special post processor that will add
feedrate reduction and acceleration delays around corners based on
angle of change. The reduction and delay is based on a user
controlled distance. Would you be interested in running some tests
to see if this kind of control could improve the cornering on your
machine?
Best Regards, Fred Smith- IMService
Listserve Special discounts and offers are at:
http://www.imsrv.com/hobby/grp.html
We are THE source for low cost Cad Cam
Discussion Thread
byron@w...
2003-05-02 23:24:33 UTC
High Speed Machining Look ahead EMC
Leslie M. Watts
2003-05-03 06:06:06 UTC
RE: [CAD_CAM_EDM_DRO] High Speed Machining Look ahead EMC
Fred Smith
2003-05-03 14:04:03 UTC
Re: High Speed Machining Look ahead EMC
Jon Elson
2003-05-03 14:46:52 UTC
Re: [CAD_CAM_EDM_DRO] High Speed Machining Look ahead EMC
Keith Rumley
2003-05-03 22:09:48 UTC
Re: [CAD_CAM_EDM_DRO] High Speed Machining Look ahead EMC
Bob Simon
2003-05-05 08:02:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: High Speed Machining Look ahead EMC
Jon Elson
2003-05-05 09:24:08 UTC
Re: [CAD_CAM_EDM_DRO] Re: High Speed Machining Look ahead EMC
Chris L
2003-05-05 10:23:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: High Speed Machining Look ahead EMC
Fred Smith
2003-05-05 18:35:57 UTC
Re: High Speed Machining Look ahead EMC
Les Watts
2003-05-06 07:35:25 UTC
Re: [CAD_CAM_EDM_DRO] High Speed Machining Look ahead EMC
IMService
2003-05-06 14:35:33 UTC
Re: Re: High Speed Machining Look ahead EMC
Les Watts
2003-05-06 16:12:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: High Speed Machining Look ahead EMC
Raymond Heckert
2003-05-06 17:38:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: High Speed Machining Look ahead EMC