Re: [CAD_CAM_EDM_DRO] Re: High Speed Machining Look ahead EMC
Posted by
Chris L
on 2003-05-05 10:23:31 UTC
>Fred, I was wondering what had happened to that development as I know it
>
>>VectorCam has some high speed machining tools that might be
>>interesting to test. We have a special post processor that will add
>>feedrate reduction and acceleration delays around corners based on
>>angle of change. The reduction and delay is based on a user
>>controlled distance.
>>
was mentioned some time ago. I for one, am certainly interested in such
a technique. I could only apply feedrate changes though, as Even with
much prodding, I am still unable to convince a particular Control
developer to find a way to apply or control >acceleration< via the
"code" itself. It could be a difficult thing to write in. I do know that
there are a lot of controls that require many of the "defaults" (feed
and Rapid rates, Accels, Safeheights Etc.) to be placed i the begining
of the file. I'm not sure how many controls allow for Accel adjustments
in the code on the Fly.
It would be a great addition to a Cad/Cam software such as Vector, and I
know of no one else trying to do it, even though it sure seems like a
very doable thing.
Please keep us posted !
Chris L
Discussion Thread
byron@w...
2003-05-02 23:24:33 UTC
High Speed Machining Look ahead EMC
Leslie M. Watts
2003-05-03 06:06:06 UTC
RE: [CAD_CAM_EDM_DRO] High Speed Machining Look ahead EMC
Fred Smith
2003-05-03 14:04:03 UTC
Re: High Speed Machining Look ahead EMC
Jon Elson
2003-05-03 14:46:52 UTC
Re: [CAD_CAM_EDM_DRO] High Speed Machining Look ahead EMC
Keith Rumley
2003-05-03 22:09:48 UTC
Re: [CAD_CAM_EDM_DRO] High Speed Machining Look ahead EMC
Bob Simon
2003-05-05 08:02:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: High Speed Machining Look ahead EMC
Jon Elson
2003-05-05 09:24:08 UTC
Re: [CAD_CAM_EDM_DRO] Re: High Speed Machining Look ahead EMC
Chris L
2003-05-05 10:23:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: High Speed Machining Look ahead EMC
Fred Smith
2003-05-05 18:35:57 UTC
Re: High Speed Machining Look ahead EMC
Les Watts
2003-05-06 07:35:25 UTC
Re: [CAD_CAM_EDM_DRO] High Speed Machining Look ahead EMC
IMService
2003-05-06 14:35:33 UTC
Re: Re: High Speed Machining Look ahead EMC
Les Watts
2003-05-06 16:12:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: High Speed Machining Look ahead EMC
Raymond Heckert
2003-05-06 17:38:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: High Speed Machining Look ahead EMC