CAD CAM EDM DRO - Yahoo Group Archive

Re: home-brewed CNC saw

Posted by forumtvm
on 2003-05-26 09:28:03 UTC
"Tim Goldstein" <timg@k...> wrote:

> The first question I have is what are you wanting to saw? Big
difference
> between what I would design if I wanted to automate cutting of steel
> bars into lengths from wanting to cut balsa blocks into sheets.

Mainly softer material, wood a bit harder than balsa.

> I have pretty well worked out the design and have purchased the
parts to
> make a CNC balsa saw. It will be intended to cut 1/32" - 1/4" sheets
> from a 24" balsa block. It will be strictly a 2 axis machine and
will
> use a fixed circular blade with the block being moved past it. I
can go
> into more detail if this is similar to what you think you need.

Will appreciate it very much. Thanks.

Randy wrote: "How big do you want the saw to be and do you want to
modify an existing table saw? Or do you want a horizontal beam saw
design?"

Table top, mainly for learning purposes.

Thanks

Peter

Discussion Thread

forumtvm 2003-05-24 20:34:41 UTC home-brewed CNC saw Tim Goldstein 2003-05-24 21:00:54 UTC RE: [CAD_CAM_EDM_DRO] home-brewed CNC saw cnc002@a... 2003-05-25 14:12:09 UTC Re: [CAD_CAM_EDM_DRO] home-brewed CNC saw forumtvm 2003-05-26 09:28:03 UTC Re: home-brewed CNC saw turbulatordude 2003-05-26 11:05:49 UTC Re: home-brewed CNC saw