Re: 8-wire stepper: series is 1/2 the amps.Strange but True
Posted by
turbulatordude
on 2003-05-31 19:35:52 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "jeffalanp" <xylotex@h...>
wrote:
since steppers are rated on one coil and drives can only use one coil
at a time, the references should be for one coil, or 2 coils wired in
series or 2 coils wired in parallel.
only 8 wire motors can be wired in parallel, so 6 wire steppers
cannot be wired in parallel.
small points, but accuracy does blow away the confusion.
Dave
wrote:
>amount
> Hi Lee,
> Won't series winding (full winding) RESISTANCE be TWICE the
> of the single coil (1/2 coil), while your series winding INDUCTANCE<snip>
> be FOUR times that of the single coil (1/2 coil)?
> > .. being twice the amount than that of a single or 1/2 coil.Half of a coil is one wire.
> > So 1 amp full series, or 2amp single or 1/2 coil.
> > Do the experts agree?
> > -Lee
since steppers are rated on one coil and drives can only use one coil
at a time, the references should be for one coil, or 2 coils wired in
series or 2 coils wired in parallel.
only 8 wire motors can be wired in parallel, so 6 wire steppers
cannot be wired in parallel.
small points, but accuracy does blow away the confusion.
Dave
Discussion Thread
Stanley A. Lewis, Jr.
2003-05-29 18:56:37 UTC
8-wire stepper
Tim Goldstein
2003-05-29 19:02:19 UTC
RE: [CAD_CAM_EDM_DRO] 8-wire stepper
JanRwl@A...
2003-05-30 10:08:29 UTC
Re: [CAD_CAM_EDM_DRO] 8-wire stepper
JanRwl@A...
2003-05-30 10:14:19 UTC
Re: [CAD_CAM_EDM_DRO] 8-wire stepper
turbulatordude
2003-05-30 18:14:31 UTC
Re: 8-wire stepper
JanRwl@A...
2003-05-30 19:17:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: 8-wire stepper
WUKSTA
2003-05-31 04:51:42 UTC
Re: 8-wire stepper
turbulatordude
2003-05-31 09:33:29 UTC
Re: 8-wire stepper
forumtvm
2003-05-31 12:30:04 UTC
Re: 8-wire stepper
Lee Studley
2003-05-31 13:01:24 UTC
Re: 8-wire stepper: series is 1/2 the amps.Strange but True
jeffalanp
2003-05-31 13:24:56 UTC
Re: 8-wire stepper: series is 1/2 the amps.Strange but True
JanRwl@A...
2003-05-31 15:19:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: 8-wire stepper
Lee Studley
2003-05-31 18:21:42 UTC
Re: 8-wire stepper: series is 1/2 the amps.Strange but True
turbulatordude
2003-05-31 19:35:52 UTC
Re: 8-wire stepper: series is 1/2 the amps.Strange but True
Mariss Freimanis
2003-05-31 22:27:44 UTC
Re: 8-wire stepper: series is 1/2 the amps.Strange but True
Harvey White
2003-05-31 23:31:28 UTC
Re: [CAD_CAM_EDM_DRO] Re: 8-wire stepper: series is 1/2 the amps.Strange but True
turbulatordude
2003-06-01 09:08:42 UTC
Re: 8-wire stepper: series is 1/2 the amps.Strange but True
Harvey White
2003-06-01 12:31:24 UTC
Re: [CAD_CAM_EDM_DRO] Re: 8-wire stepper: series is 1/2 the amps.Strange but True
jeffalanp
2003-06-01 12:55:40 UTC
Re: 8-wire stepper: series is 1/2 the amps.Strange but True
Charles Knight
2003-06-01 17:55:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: 8-wire stepper: series is 1/2 the amps.Strange but True
turbulatordude
2003-06-01 19:11:05 UTC
Re: 8-wire stepper: series is 1/2 the amps.Strange but True
Harvey White
2003-06-01 19:18:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: 8-wire stepper: series is 1/2 the amps.Strange but True
Mariss Freimanis
2003-06-01 19:58:15 UTC
Re: 8-wire stepper: series is 1/2 the amps.Strange but True
jeffalanp
2003-06-02 11:26:48 UTC
Re: 8-wire stepper: series is 1/2 the amps.Strange but True