Re: [CAD_CAM_EDM_DRO] Proper solid state relay to use for spindle control

----- Original Message -----
From: mrgamber <mgamber@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, June 25, 2003 2:45 PM
Subject: [CAD_CAM_EDM_DRO] Proper solid state relay to use for spindle
control


> The following offers a very nice package of two solid state relays.
> http://members.shaw.ca/axxus/db1v20.htm
>
> I have been looking through catalogs and notice that non-pcb mounted
> relays cost ~$25 for 1. The relays on the above PCB cost ~$1.50 each.
>
> I have intentions of using these for Spindle, Mist (AC solenoid) and
> to turn off the power supply to my Gecko drivers.
>
> Question: Are the relays on this PCB appropriate for this use?
>
> Spindle motor is a (TAIG) 1/10 HP AC, but I may upgrade to 1/4 HP
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>