Re: [CAD_CAM_EDM_DRO] CNC vs HOT WEATHER, WHAT TO DO??.

Luis: It is actually a simple "fix", if somewhat expensive: INSULATE the
building with fiberglass batting FOR the purpose (to at leasr R13), install
dry-wall or particle-board inside, and AIR-CONDITION the room!

The solid-state stuff will be OK if not OPERATED. It might be OK if its
"rated temps" are not exceeded, even IF operated in that heat. It is actually
unlikely that you will exceed the rated temp at 100F, if it is not exceeded at
70F. Who knows! This is the kinda thing you just hafta TRY "on-site"!


[Non-text portions of this message have been removed]