CAD CAM EDM DRO - Yahoo Group Archive

Re: e-stop sceme

Posted by zbushz
on 2003-08-09 16:25:02 UTC
Tony,
So what everyone seems to be saying is the control of the powersupply
has to be on the primary(ac) side...which means you have to bleed down
the capacitors( as in Mariss' DC brush type servodrive E-stop)

-- In CAD_CAM_EDM_DRO@yahoogroups.com, "Antonius J.M. Groothuizen"
<agroot@s...> wrote:
> Mike,
>
> I'd put a 4 pole relay with contacts rated at about 5A 120VAC on the
> primary of the transformer.

Discussion Thread

zbushz 2003-08-08 09:02:45 UTC e-stop sceme zbushz 2003-08-08 09:53:53 UTC Re: e-stop sceme Antonius J.M. Groothuizen 2003-08-08 14:59:18 UTC Re: e-stop sceme zbushz 2003-08-09 05:40:01 UTC Re: e-stop sceme washcomp 2003-08-09 10:18:20 UTC Re: e-stop sceme zbushz 2003-08-09 12:02:08 UTC Re: e-stop sceme Antonius J.M. Groothuizen 2003-08-09 14:06:30 UTC Re: e-stop sceme zbushz 2003-08-09 16:25:02 UTC Re: e-stop sceme Antonius J.M. Groothuizen 2003-08-09 20:17:57 UTC Re: e-stop sceme washcomp 2003-08-10 12:55:34 UTC Re: e-stop sceme zbushz 2003-08-10 14:59:23 UTC Re: e-stop sceme zbushz 2003-08-10 15:00:04 UTC re: e-stop sceme zbushz 2003-08-10 15:16:35 UTC re: e-stop sceme Jon Elson 2003-08-10 16:26:07 UTC Re: [CAD_CAM_EDM_DRO] re: e-stop sceme