Re: [CAD_CAM_EDM_DRO] potential product
Posted by
Vince Negrete
on 2003-08-15 03:37:49 UTC
Very good idea. I'm sure there will be much input on stuff to add-in for
even more features, so let me count my chickens and say, sure, "I Be In.."
even more features, so let me count my chickens and say, sure, "I Be In.."
----- Original Message -----
From: "Jon Elson" <elson@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, August 14, 2003 10:39 AM
Subject: [CAD_CAM_EDM_DRO] potential product
> Hello, everyone,
>
> I'm working with a local client who has a small milling machine
> with Gecko 320 servo drives. I'm working on how to hook up the
> drives to my Universal Stepper Controller to get the maximum usefulness
> out of it, and was thinking it gets complicated enough that I might
> want to make boards available to other Gecko 320 users.
>
> Here are the features I'm looking at putting on it :
>
> 1. emergency stop interface to the Gecko fault signal, so it shuts
> down all axes, spindle, coolant, etc. and informs the computer
> of the E-stop. It would also have tally lights to remember which
> axis was the one that caused the shutdown. There would be an
> external connection for one or more E-stop switches on the
machine,
> and accept E-stop from the VFD or other source as well. (This is
> already in my USC
>
> 2. E-stop control, or even DC power supply switching, to shut
> down and brake the motors from computer control.
>
> 3. encoder relaying by use of opto-isolators from the Gecko drives to
> the computer, so that EMC becomes a DRO when you hit e-stop.
> The coordinate system would be preserved, so that when you
> came out of e-stop, the same coordinate reference would be there.
>
> Most of this functionality should work with other step/direction interface
> systems, too, so you wouldn't have to use it with my USC board, only.
>
> I'm thinking this board should be able to go for $50 - 75, since there
isn't
> all that much on it. What do you pwople think about such a product?
> Would you want one?
>
> I'm also thinking about making kits and complete servo driver systems,
> including power supply, 3 or 4 Gecko 320's, my USC board and the
> board described above, with heat sinks, fans, connector panel, etc.
> I don't have a real good feel for what that should cost, though.
>
> Jon
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
Discussion Thread
Jon Elson
2003-08-14 10:42:43 UTC
potential product
Alex
2003-08-14 20:02:16 UTC
Re: [CAD_CAM_EDM_DRO] potential product
Jon Elson
2003-08-14 22:40:10 UTC
Re: [CAD_CAM_EDM_DRO] potential product
Vince Negrete
2003-08-15 03:37:49 UTC
Re: [CAD_CAM_EDM_DRO] potential product
zbushz
2003-08-15 08:25:17 UTC
Re: potential product
jeffalanp
2003-08-15 09:16:28 UTC
Re: potential product
Jon Elson
2003-08-15 11:10:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: potential product
mmurray701
2003-08-15 20:43:17 UTC
Re: potential product