Re: [CAD_CAM_EDM_DRO] potential product

Jon,
can you make it to work with Xylotex too.
Alex

----- Original Message -----
From: Jon Elson <elson@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, August 14, 2003 1:39 PM
Subject: [CAD_CAM_EDM_DRO] potential product


> Hello, everyone,
>
> I'm working with a local client who has a small milling machine
> with Gecko 320 servo drives. I'm working on how to hook up the
> drives to my Universal Stepper Controller to get the maximum usefulness
> out of it, and was thinking it gets complicated enough that I might
> want to make boards available to other Gecko 320 users.
>
> Here are the features I'm looking at putting on it :
>
> 1. emergency stop interface to the Gecko fault signal, so it shuts
> down all axes, spindle, coolant, etc. and informs the computer
> of the E-stop. It would also have tally lights to remember which
> axis was the one that caused the shutdown. There would be an
> external connection for one or more E-stop switches on the
machine,
> and accept E-stop from the VFD or other source as well. (This is
> already in my USC
>
> 2. E-stop control, or even DC power supply switching, to shut
> down and brake the motors from computer control.
>
> 3. encoder relaying by use of opto-isolators from the Gecko drives to
> the computer, so that EMC becomes a DRO when you hit e-stop.
> The coordinate system would be preserved, so that when you
> came out of e-stop, the same coordinate reference would be there.
>
> Most of this functionality should work with other step/direction interface
> systems, too, so you wouldn't have to use it with my USC board, only.
>
> I'm thinking this board should be able to go for $50 - 75, since there
isn't
> all that much on it. What do you pwople think about such a product?
> Would you want one?
>
> I'm also thinking about making kits and complete servo driver systems,
> including power supply, 3 or 4 Gecko 320's, my USC board and the
> board described above, with heat sinks, fans, connector panel, etc.
> I don't have a real good feel for what that should cost, though.
>
> Jon
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>