RE: [CAD_CAM_EDM_DRO] Electrocraft Motor Specs

I got mine from goldmine electronics, with 1024 count encoders, for $59.95,
they are some seriously torquey motors...


Erie Patsellis
Shelbyville Design & signworks
217-774-4444
signworks@... <mailto:signworks@...>

<mailto:signworks@cond>

Visit our website at: http://www.shelbyvilledesign.com



-----Original Message-----
From: Chris Baugher [mailto:cbaugher_yahoo@...]
Sent: Tuesday, August 19, 2003 11:15 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Electrocraft Motor Specs

On Tue, 19 Aug 2003, Erie Patsellis wrote:

> Since everyone has their EC catalogs out, does anyone have specs on an
> electrocraft E712 motor, part # 712-015-0774?

Yes! I have exactly those motors (well not technically mine, but I'm
helping a friend with the electricals for an older Wells Index refit, and
he picked up these motors on ebay).
Anyway, here's what I have:

37.51 oz-in/A (Kt)
25.0 - 30.5 V/kRPM (Kv)
Terminal resistance 0.75 - 1.02 Ohms @ 4A
Max terminal voltage 60V
Max continuous speed 2100RPM
Max peak torque 1500 oz-in
Max peak current 44.5A (unsure)
Max continuous stall torque at maximum motor temp 300oz-in
Max continuous current 8.9A

The seller didn't send a spec sheet with the motors, but he said these
were the specs he was given when he purchased the motors originally. He
said the scan was blurry for the peak current number but he thought 44.5
was correct. Since I haven't seen an original spec sheet for these I
can't confirm the numbers, but I did connect the motor to a variable power
supply to check the Kv, and I got about 29V @ 1000rpm, which is right in
range. I can also say that these motors have some serious torque.
So I would say the specs are probably accurate.

C|

Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/